Flash Files Android Devices Apps&Softwear

Sunday, December 10, 2017

bluboo maya flash file free download

bluboo maya flash file free download

bluboo maya flash file free download

Below is the direct link to download the Bluboo Maya Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.

How to Flash

Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.


Download

Bluboo T3110 flash file free download

Bluboo T3110 flash file free download

Bluboo T3110 flash file free download

Below is the direct link to download the Bluboo T3110 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.

How to Flash

Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.


Download

Bluboo Xtouch 5.1 Firmware Free Download

Bluboo Xtouch 5.1 Firmware Free Download

Bluboo Xtouch 5.1 Firmware Free Download

Below is the direct link to download the Bluboo Xtouch 5.1 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.

How to Flash

Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Download

Bluboo XPlus 4.0 Firmware Free Download

Bluboo XPlus 4.0 Firmware Free Download

Bluboo XPlus 4.0 Firmware Free Download

Below is the direct link to download the Bluboo XPlus 4.0 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.

How to Flash

Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.


Download

iPhone 6 – MTK6571 Flash File Download

iPhone 6 – MTK6571 Flash File Download

iPhone 6 – MTK6571 Flash File Download



iPhone 6 – MTK6571 Flash File
The official iPhone 6 – MTK6571 Flash File for the European iPhone 6 – MTK6571 is available for download through the official download links provided below.
Firmware Details
Device iPhone 6 – MTK6571
Models: iPhone 6
Android: iPhone 6 – MTK6571_4.4
Version: 4.4
Firmware: MTK6571
Build number:iPhone 6 – MTK6571
Region:
Status: Official
Type: Full
File Name: update.zip
How to Flash iPhone 6 – MTK6571 With Spflash tool?
The requirements of iPhone 6 – MTK6571 is battery backup of 40% to 50%.
Download and install iPhone 6 – MTK6571 Usb Drivers.
Download Stock Rom of iPhone 6 – MTK6571 Firmware
Power Off your Mobile and remove Battery.
Download and extract spflash tool.
Now open sp flash tool and specify scatter file from that stock rom.
Now press download button. if face any error change download mode to firmware upgrade.
when Green bar of Ok appears your flashing done.
Now unplug cable and remove battery.
Now insert battery and press power button.
Your flashing is complete enjoy.
if you faced any error copy and paste that error in comments.


Download

Error 53 iphone 6 iOS 9.2.1 13D20 Update 100% tested

Error 53 iphone 6 iOS 9.2.1 13D20 Update 100% tested

Error 53 iphone 6 iOS 9.2.1 13D20 Update 100% tested

error-53-iphone-6-ios-9-2-1-13d20-update-100-tested
Prior this month, the report of a gadget bricking mistake 53 spread like rapidly spreading fire. Apple likewise recognized the blunder and said it was deliberate and jumps out at give greatest security to the clients. Be that as it may, now Apple has discharged a reconsidered form of iOS 9.2.1 programming overhaul to alter every one of those gadgets transformed into blocks by the blunder 53. This minor iOs 9.2.1 correction conveys an assemble number 13D20.
For those not well known, blunder 53 successfully blocks an iOS gadget and it shows up on the gadgets that host got third-gathering Touch ID substitution rather than one from Apple’s official repair focuses. When clients overhaul their repaired gadget to iOS 9 or later utilizing iTunes, they experienced mistake 53 because of a unique segment check disappointment. Because of the reports, Apple recognized the mistake 53 and said it is intended to enhance iOS gadget’s security.
Apple has now tended to the blunder by pushing a minor iOS 9.2.1 modified overhaul. Clients who experienced mistake 53 can now alter their bricked gadgets by just restoring the updated variant of iOS 9.2.1 on those gadgets. This redesign won’t just alter the as of now bricked iOS gadgets additionally keep mistake 53 from happening when a gadget repaired at outsider destinations is upgraded to iOS 9.
On the off chance that you didn’t see, iOS 9.2.1 is not another form, but instead Apple has picked to include a patch inside the current iOS 9.2.1 to address the gadget bricking mistake 53. Apple has likewise apologized its clients for the disadvantage brought about by the mistake:
Some customers’ devices are showing ‘Connect to iTunes’ after attempting an iOS update or a restore from iTunes on a Mac or PC. This reports as an Error 53 in iTunes and appears when a device fails a security test. This test was designed to check whether Touch ID works properly before the device leaves the factory.
Today, Apple released a software update that allows customers who have encountered this error message to successfully restore their device using iTunes on a Mac or PC.
We apologize for any inconvenience, this was designed to be a factory test and was not intended to affect customers. Customers who paid for an out-of-warranty replacement of their device based on this issue should contact AppleCare about a reimbursement.
In spite of the fact that this minor iOs 9.2.1 overhaul alters the blunder 53, yet despite everything you won’t have the capacity to utilize Touch ID on a gadget with an outsider Touch ID introduced on the grounds that the Touch ID data is put away in a secured enclave, which is not in any case available for Apple itself. It implies on a gadget with an informal Touch ID sensor introduced, you won’t have the capacity to utilize your unique finger impression to open your gadget, make iTunes buys, and other Touch ID usefulness since iOS 9.2.1 form 13D20 will cripple Touch ID on the gadget the length of you have an unsupported Touch ID sensor associated with it. With a specific end goal to get a working Touch ID, you’ll need to get your gadget repaired at an official Apple repair focus.
Apple has stepped in the right providing so as to head a brief fix for the troublesome blunder 53. Notwithstanding, even with the accessibility of the fix for mistake 53, Apple has as of now been hit with a legal claim over the same blunder.

Download iOS 9.2.1 Build 13D20

Since the revised iOS 9.2.1 build 13D20 is not available as an OTA update, you’ll have to download the full-sized IPSW firmware file and install it using iTunes. Here are the direct links to download iOS 9.2.1 build 13D20:
Do you have a gadget bricked by mistake 53? Did this overhaul settle your gadget? Share your involvement in the remarks segment underneath.

iPhone 7 Plus Firmware download Free

iPhone 7 Plus Firmware download Free

iPhone 7 Plus Firmware download Free

iphone-7-plus-firmware-download-free
 Final iOS 10 / 10.1.1 / 10.1 / 10.0.2 / 10.0.3 download IPSW links and iOS 10.2 beta are available to install on iPhone 7, 7 Plus, 6s, 6s Plus, 6, 6 Plus, SE, 5s, 5c, 5, iPad 4 and over, and iPod touch 6th-generation. This final build is available to everyone worldwide.
iOS 10 is Apple’s latest major update for iPhone, iPad and iPod touch devices, bringing in a number of new features to one of the world’s most popular mobile platform.

Download

iOS 10.1 (iPhone 6 Plus) Firmware download Free

iOS 10.1 (iPhone 6 Plus) Firmware download Free

iOS 10.1 (iPhone 6 Plus) Firmware download Free

ios-10-1-iphone-6-plus-firmware-download-free
Final iOS 10 / 10.1.1 / 10.1 / 10.0.2 / 10.0.3 download IPSW links and iOS 10.2 beta are available to install on iPhone 7, 7 Plus, 6s, 6s Plus, 6, 6 Plus, SE, 5s, 5c, 5, iPad 4 and over, and iPod touch 6th-generation. This final build is available to everyone worldwide.
iOS 10 is Apple’s latest major update for iPhone, iPad and iPod touch devices, bringing in a number of new features to one of the world’s most popular mobile platform.

Download

Iphone Latest Firmware iOS 10.2 (iPhone 6s)

Iphone Latest Firmware iOS 10.2 (iPhone 6s)

Iphone Latest Firmware iOS 10.2 (iPhone 6s)

 Apple has released iOS 10.0.2 (build 14A456), the small update includes multiple bug fixes for iOS 10 on any compatible iPhone or iPad.
The three primary bugs addressed with iOS 10.0.2 include a fix for headphone audio controls randomly not working, a bug with Photos app and iCloud Photo Library, and a fix for an issue with some app extensions.
The small software update is available now to all users who are running iOS 10 or iOS 10.0.1. The easiest way to download the iOS 10.0.2 software update is through the OTA mechanism on the iPhone or iPad itself, accessible from Settings > General > Software

Download

iphone 6s clone mt6571 firmware

iphone 6s clone mt6571 firmware

iphone 6s clone mt6571 firmware

Below is the direct link to download the iPhone 6S Clone Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.

How to Flash

Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes Form Sunyweb.net

Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.

Download

iPhone 5C Clone Stock Firmware Download

iPhone 5C Clone Stock Firmware Download

iPhone 5C Clone Stock Firmware Download

iPhone 5C Clone Stock Firmware Download Free Here.iPhone 5C Clone Stock Firmware Downloadwith its istruction How to update. iPhone 5C Clone Stock Firmware Download and all Firmware Here available.

How to Flash

Step 1: Download and extract firmware on your computer.
Step 2: Download and Extract Odin v3.12 or any new version.
Step 3: Open Odin v3.12.
Step 4: Now, restart your Phone in Download Mode (by pressing Home + Power + Volume Down buttons together).
Step 5: Now, Connect your Samsung device to the computer and wait until you get a blue sign in Odin.
Step 6: Now, Add the firmware file in Odin using AP / PDA button.
Step 7: Now, Make sure re-partition is NOT ticked before starting the flashing process.
Step 8: Finally, Click on the start button, sit back and wait few minutes to get the flashing process completed.

Download

Popular Posts

Recent Posts

Unordered List

Text Widget

Powered by Blogger.